Pages

Showing posts with label Pig Iron Productions. Show all posts
Showing posts with label Pig Iron Productions. Show all posts

Tuesday, 18 February 2014

More 28mm infected/ zombies - Dara O'Briain in drag zombie!

Below are pictures of the last three Pig iron miniatures off the paint tray. As per my last post, the figures are based on Micro Art Studio bases and have been painted with a mix of Vallejo and Citadel paints and washes.

Now, I can't be the only gamer who's mind starts to wander when he's painting... but is it me, or does the female zombie in the yellow blouse look like comedian Daro O'Briain in drag?
 
Next on the paint table are four US Special forces troops and an attempt at digital camouflage!

Monday, 17 February 2014

28mm infected/ Zombies

 The problem with following blogs is that you always see more goodies that you must have!  Pig Iron Miniatures new 'infected' were a must have. When I saw the pictures on their blog they reminded me straight away of the infected dark seekers from the movie 'I am legend'.

When the figures arrived I was delighted with the quality of casting and the details on the figures. I was however surprised to find that they had 'posts' on the end of their feet, meaning I would have to use resin bases.

A quick ebay search led me to Micro Art Studios. They provide a super range of detailed resin bases and gaming accessories. I bought 2 packs of their 25mm urban bases, they ship 5 bases selected from the 12 below.

To attach the figures I used a Dremel to drill two holes. I then used superglue to fix them in place.

As for painting, I used a selection of Citadel and Vallejo paints and washes. I used Citadel rotting flesh from their old range for the flesh (I suppose they have an equivalent now).

The pictures below show the completed figures.




OK this picture is the same as the first, but I left the flash on and it created a nice sinister effect... I'll give you three to start running!

Next on the paint table, three more infected and four special forces figures from Hasslefree miniatures.

Saturday, 18 June 2011

New Pig Iron Heavy Infantry

Following their first outing on the games table, where their commander led them to glorious annihilation against an inferior force of Kolony conscripts (well done Stu!), I decided to add another SAW. I ordered a packet of Pig Iron assault troops that contains the SAW and, in order to give a little figure variation, a packet of backpacks and belt gear. When the packaged arrived, only two days later, Pig Iron had mistakenly dispatched the HQ pack instead. To their credit, after contacting them by email, the correct packet arrived free of charge two days later.

The heads are not separate heads in the Assault troopers packet so to increase variation I chopped the head off the SAW gunner, replacing it with a helmetless head off an alternative head sprue.

I used the same paint scheme as before (see earlier post) but with one difference. Having spent a little time playing the PS3 game Killzone 3, I noticed that the uniform lights and optics of the ISA troops are light blue. Dutifully I painted the optics on these figures in Citadel Regal Navy followed by a smaller dot of Ice blue... now I've got to go back and repaint the others!


The optional backpacks make the figures stand out from the original group and give them a real 'on campaign' look.
The poor SAW gunner now has to contend with male pattern baldness and a ruddy great backpack, as well as his cumbersome firearm!

I used three of the figures from the command pack; I swapped the heads of the sniper and the officer and added backpacks for further variation.


Friday, 3 June 2011

New Kolony Militia Squad

Now the SATs exams are out of the way, I have been able to put brush to figure! Below are the results, a second squad of Pig Iron Kolony Militia.

To distinguish them from my existing squad, I opted for the winter headgear alternative head sprue. Basically the figures are wearing Soviet style, fur Ushankas and side caps.

The pictures below show the squad defending a heavily bomb damaged factory unit (an old Snapdragon miniatures piece).


On Sunday I will be trying them out for the first time using a set of free rules I downloaded called FAD - Fast And Dangerous. A battle report will follow.

Thursday, 28 April 2011

Completed 'Kindle' Sci- fi Bunker


In my last blog entry I mused on the possibility of converting the cardboard liner from the box of my Amazon Kindle into a Sci Fi Bunker... Here it is... The model was painted using a mix of Vallejo, Citadel and B&Q paints; it was 'dirtied' and 'worn' using citadel washes.


The Helghast logo was copied and printed off the net and glued in place, the lettering was hand painted from a Helghan Alphabet (also found on the net).


The steel pipes are made from large bore drinking straws.


The ladders were made from 'granny grid'. The pipe leading into the bunker was made from the flexible part of the drinking straw. The slogan reads 'Victory or death' in Helghan.

To give access to miniatures (Pig Iron Kolony Militia - see earlier posts) I cut the card structure at the base so that the whole top half lifts off. The boxes and cases are from Fenris Games.

I felt that the bunker stood a little too high. I couldn't make it lower, so decided to justify the height by cutting into the roof and forming a rooftop observation post. Here an Helghan Officer consults with an Technical NCO.
A birds eye view shows off the whole model nicely.

Wednesday, 13 April 2011

Sci-Fi Bunker/ Observation Tower (Part 4: Interior)

This final set of images shows the completed model and the interior detail. I built a fire step around the the entire edge using foam core. I then covered the step with pva glue and fine sand. I cut a square entrance hatch out of plasticard. To finish it off I added scaled down Helghast propoganda posters that I copied off the internet.A Helghan officer confers with a technical NCO whilst two troopers watch on. The figures are Pig Iron Kolony Militia, the crates are from Fenris Games.

Sci-Fi Bunker/ Observation Tower (Part 3: base)

The images below show the detail of the base prior to painting. The steps are made of foam core, I made small hummocks out of poly filler; this was then covered in a mix of sharp sand, gravel and small stones. To add a little more detail I have included a discarded coil of barbed wire (I don't recall the manufacturer) and a couple of girders cut from lengths of plastic girder from a model railway store.
The following pictures show the final painted base. The whole thing was base coated in Burnt chocolate Weatherex masonary paint. This was then dry brushed with Citadel Graveyard Earth and Bleached Bone.




The figures shown are Pig Iron Kolong militia.



Thursday, 31 March 2011

Sci-Fi Bunker/ Observation tower

It's amazing what a day off can produce! After the last Starship Troopers game, I decided that my heavy infantry needed a little extra protection from the bug menace. The model stands approx 5" high and is 4" square. The model is made from foam core, 'granny grid', mdf sheet and an old Airfix bridge kit (for the girders). A ladder is situated below the model and goes up through a doorway into the interior of the bunker. The finished model will have a roof (your bugs won't get in that easily Stu!) The bunker will also double up for my 'Kill Zone' Helghast themed Sci-fi game (using Pig Iron Productions minis (see previous posts).

Wednesday, 30 March 2011

Pig Iron Kolony Militia

After dedicating most of my recent painting time to zombies and scenics, I finally found time to return to my Pig Iron Productions Kolony Militia. The figures are from the Kolony Militia Booster pack, which contains 10 figures and a sprule of seperate heads, costing £17. The figures, as always from Pig Iron, were superbly cast and had no flash. I painted the figures to resemble 'space Nazis' and the Helghast from the PS3 game Killzone. If you are interested in the details of the paint scheme see my earlier Kolony Militia post. The fencing in the background was scratch built by myself using wooden dowl, 'granny grid', MDF and sharp sand. I have built numerous lengths and gateways for flexible use on the games table. All the other scenics are from the superb Fenris Games.

Wednesday, 23 February 2011

Pig Iron Heavy Infantry v Bugs

Following are a selection of images from a Starship Troopers game at the Evesham Wargames Club. The Infantry are Pig Iron Miniatures Heavy Infantry and the Bugs are from the old Mongoose publishing Starship troopers range.An infantry patrol is ambushed in a dry river bed.
Bugs to the left of them, bugs to the right of them - prelude to a massacre!

A bug hole opened up just as the HQ section de-bussed from their APC (a converted GW Rhino).

A second infantry section took cover in the rocks and successfully held off a bug attack with long range fire.

'Why are we 'ere Sarge?'

Wednesday, 29 December 2010

Fenris Games Resin Scenics

Having spent a substantial amount of time looking for a supplier of 28mm scale sci-fi scenics, I lucked upon Fenris Games (http://www.fenrisgames.com/). The guys at Fenris supply a big range of sculptured bases and sci-fi and fantasy scenic bits to add that little extra to your gaming table.

I purchased the pieces via their ebay store, and when they arrived only a few days later, I immediatly bought more as I was so happy with the quality. The pieces are cast in urethane resin and their vacuum degassing process leaves a near perfect, bubble free, finish. The detail is exceptional and, in my humble opinion, is probably the best I have ever seen.

When it came to painting the Sci-fi modules I decided on a grimy, industrial look. For my inspiration look at the PS3 game Killzone 2 or the film Blade Runner. The paint job was
very simple. Citadel Chaos black spray paint undercoat followed by a heavy drybrushing of Citadel Boltgun Metal. Once dry the models were washed in Citadel Badham Black and when dry, Citadel Devlan wood. Finally I dipped into the depths of my paint box to use a (glass) jar of Miniature Paints Metalic Bronze to highlight the tube, cable and wire details, which I then washed in Devlan mud.

Below are some of the goodies in their final painted form:
1) Sci-fi atmosphere processor (£5.99) The figures are Kolony Militia from Pig Iron Miniatures.

2) Sci-fi engineering module (£5.99) Again the figures are Pig Iron.

3) 1/55 scale street furniture bio hazard barrels (£3.25 for 10) The figures are zombies from Coldwar miniatures range - perhaps we have now found the cause of the epidemic!!