28mm scratch built Mosque for World War Two North Africa

The latest addition to my World War 2North African/ Tunisian village, is a small mosque. When designing the building I decided not to include a minaret tower, reasoning that a mosque in a small village wouldn't have one.

The frame of the building was made using foam board attached to an MDF base using grab adhesive. This was then covered with sharp sand and painted with B&Q Soft Almond interior paint.

The door was made from a scrap piece of MDF and the windows were made with plastic 'granny grid'. Both of these were painted and highlighted in blue.

The dome was made from a Polystyrene ball from Hobby Craft. It was cut in half, glued to an MDF roof. I then covered the dome in fine surface filler that was sanded down to a smooth finish once dry. I decided not to paint the dome gold, but in the same blue as the doors of all the building in the village to match.

The base was then completed by gluing sharp sand that was painted, washed and highlighted in Citadel paints. To finish it off I added foliage scatter for weeds and self adhesive grass tufts.

Next on the table is another house, this time made from cork tiles!

28mm sctratch built Tunisian or North African buildings for WW2

 That's right folks, the summer holidays are here, so I reappear on the painting scene.

I have been working on a 28mm World War Two North Africa project on and off for a while now. The pictures below are of five scratch built buildings.

The buildings are made from foam board and MDF. The buildings were clad in a mixture of PVA glue and sharp sand (remember basetex?) which I applied using a plastic spatula. The base itself was covered in watered down PVA and scattered with sharp sand.

The roofs and doors were all made from thin MDF which I then scored with a pointed file to create individual planks.

The paint scheme is based upon the Tunisian village of Sidi Bou, where every building is painted white and all the doors and shutters painted blue. I used a combination of Citadel, Vallejo and B&Q tester paints.

To complete the models I added clump foliage to represent a kitchen garden on two models and weeds. I also used dry grass spots to represent weeds.

Next on the table are a few more buildings and a well.